Liquid Silicone rubber for gypsum molds
Liquid Silicone rubber for gypsum applications
Liquid Silicone rubbercan used forgypsum crafts, gypsum statues, gypsum ceiling rose, gypsum columns,
gypsum line, gypsum ceiling board, and all kinds of gypsum
Liquid Silicone rubber for gypsum features
Liquid Silicone rubberis two part silicone with general hardness of 22 to 50 shore A
after curing with features as follows: high tensile and tear
strength; high duplication times; Low linear shrinkage; resistance
to high-temperature; Low shrinkage and non-deformation; resistance
to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One:Take 100g of part A and add 2g of part B and mix the silicone
rubber and curing agent evenly.
Step Two:vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5
minutes, otherwise, once the silicone rubber has cross-link
reaction during vacuum pumping process, it will not be operated.
Step Three:Pouring the mixture into the frame with original gypsum mold
Shelf life for Liquid Silicone rubber
10 to 12months, when stored in a dry & cool place under the
room temperature 25.
Packing for Liquid Silicone rubber
1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed
packing, 200 kg/drum
For more information, please feel free to contact Ms Orianna
office no. : 0086-755-89948013
Email : hyyg(at)szrl(dot)net
Welcome to our website www dot szrl dot net